X-Git-Url: http://git.bitcoin.ninja/index.cgi?a=blobdiff_plain;f=README.md;h=a774e73e75ecbf1bc2c8c5c5b45798a66b866eef;hb=0ec589fac376539edafe48b9d712a5a920ba5f34;hp=60635d5dfd9fbda58bc25d0e30c886d6bd4bc3d5;hpb=58525c94d547be1c8167d16c298bdd75506db328;p=youtube-dl

diff --git a/README.md b/README.md
index 60635d5df..a774e73e7 100644
--- a/README.md
+++ b/README.md
@@ -80,6 +80,8 @@ which means you can modify it, redistribute it or use it however you like.
                                      on Windows)
     --flat-playlist                  Do not extract the videos of a playlist,
                                      only list them.
+    --mark-watched                   Mark videos watched (YouTube only)
+    --no-mark-watched                Do not mark videos watched (YouTube only)
     --no-color                       Do not emit color codes in output
 
 ## Network Options:
@@ -409,13 +411,18 @@ which means you can modify it, redistribute it or use it however you like.
 
 # CONFIGURATION
 
-You can configure youtube-dl by placing any supported command line option to a configuration file. On Linux, the system wide configuration file is located at `/etc/youtube-dl.conf` and the user wide configuration file at `~/.config/youtube-dl/config`. On Windows, the user wide configuration file locations are `%APPDATA%\youtube-dl\config.txt` or `C:\Users\<user name>\youtube-dl.conf`. For example, with the following configuration file youtube-dl will always extract the audio, not copy the mtime and use a proxy:
+You can configure youtube-dl by placing any supported command line option to a configuration file. On Linux, the system wide configuration file is located at `/etc/youtube-dl.conf` and the user wide configuration file at `~/.config/youtube-dl/config`. On Windows, the user wide configuration file locations are `%APPDATA%\youtube-dl\config.txt` or `C:\Users\<user name>\youtube-dl.conf`.
+
+For example, with the following configuration file youtube-dl will always extract the audio, not copy the mtime, use a proxy and save all videos under `Movies` directory in your home directory:
 ```
---extract-audio
+-x
 --no-mtime
 --proxy 127.0.0.1:3128
+-o ~/Movies/%(title)s.%(ext)s
 ```
 
+Note that options in configuration file are just the same options aka switches used in regular command line calls thus there **must be no whitespace** after `-` or `--`, e.g. `-o` or `--proxy` but not `- o` or `-- proxy`.
+
 You can use `--ignore-config` if you want to disable the configuration file for a particular youtube-dl run.
 
 ### Authentication with `.netrc` file
@@ -453,6 +460,7 @@ The basic usage is not to set any template arguments when downloading a single f
  - `alt_title`: A secondary title of the video
  - `display_id`: An alternative identifier for the video
  - `uploader`: Full name of the video uploader
+ - `license`: License name the video is licensed under
  - `creator`: The main artist who created the video
  - `release_date`: The date (YYYYMMDD) when the video was released
  - `timestamp`: UNIX timestamp of the moment the video became available
@@ -599,7 +607,7 @@ You can merge the video and audio of two formats into a single file using `-f <v
 
 Format selectors can also be grouped using parentheses, for example if you want to download the best mp4 and webm formats with a height lower than 480 you can use `-f '(mp4,webm)[height<480]'`.
 
-Since the end of April 2015 and version 2015.04.26 youtube-dl uses `-f bestvideo+bestaudio/best` as default format selection (see #5447, #5456). If ffmpeg or avconv are installed this results in downloading `bestvideo` and `bestaudio` separately and muxing them together into a single file giving the best overall quality available. Otherwise it falls back to `best` and results in downloading the best available quality served as a single file. `best` is also needed for videos that don't come from YouTube because they don't provide the audio and video in two different files. If you want to only download some DASH formats (for example if you are not interested in getting videos with a resolution higher than 1080p), you can add `-f bestvideo[height<=?1080]+bestaudio/best` to your configuration file. Note that if you use youtube-dl to stream to `stdout` (and most likely to pipe it to your media player then), i.e. you explicitly specify output template as `-o -`, youtube-dl still uses `-f best` format selection in order to start content delivery immediately to your player and not to wait until `bestvideo` and `bestaudio` are downloaded and muxed.
+Since the end of April 2015 and version 2015.04.26 youtube-dl uses `-f bestvideo+bestaudio/best` as default format selection (see [#5447](https://github.com/rg3/youtube-dl/issues/5447), [#5456](https://github.com/rg3/youtube-dl/issues/5456)). If ffmpeg or avconv are installed this results in downloading `bestvideo` and `bestaudio` separately and muxing them together into a single file giving the best overall quality available. Otherwise it falls back to `best` and results in downloading the best available quality served as a single file. `best` is also needed for videos that don't come from YouTube because they don't provide the audio and video in two different files. If you want to only download some DASH formats (for example if you are not interested in getting videos with a resolution higher than 1080p), you can add `-f bestvideo[height<=?1080]+bestaudio/best` to your configuration file. Note that if you use youtube-dl to stream to `stdout` (and most likely to pipe it to your media player then), i.e. you explicitly specify output template as `-o -`, youtube-dl still uses `-f best` format selection in order to start content delivery immediately to your player and not to wait until `bestvideo` and `bestaudio` are downloaded and muxed.
 
 If you want to preserve the old format selection behavior (prior to youtube-dl 2015.04.26), i.e. you want to download the best available quality media served as a single file, you should explicitly specify your choice with `-f best`. You may want to add it to the [configuration file](#configuration) in order not to type it every time you run youtube-dl.
 
@@ -747,7 +755,7 @@ means you're using an outdated version of Python. Please update to Python 2.6 or
 
 ### What is this binary file? Where has the code gone?
 
-Since June 2012 (#342) youtube-dl is packed as an executable zipfile, simply unzip it (might need renaming to `youtube-dl.zip` first on some systems) or clone the git repository, as laid out above. If you modify the code, you can run it by executing the `__main__.py` file. To recompile the executable, run `make youtube-dl`.
+Since June 2012 ([#342](https://github.com/rg3/youtube-dl/issues/342)) youtube-dl is packed as an executable zipfile, simply unzip it (might need renaming to `youtube-dl.zip` first on some systems) or clone the git repository, as laid out above. If you modify the code, you can run it by executing the `__main__.py` file. To recompile the executable, run `make youtube-dl`.
 
 ### The exe throws a *Runtime error from Visual C++*
 
@@ -880,16 +888,17 @@ After you have ensured this site is distributing it's content legally, you can f
     ```
 5. Add an import in [`youtube_dl/extractor/__init__.py`](https://github.com/rg3/youtube-dl/blob/master/youtube_dl/extractor/__init__.py).
 6. Run `python test/test_download.py TestDownload.test_YourExtractor`. This *should fail* at first, but you can continually re-run it until you're done. If you decide to add more than one test, then rename ``_TEST`` to ``_TESTS`` and make it into a list of dictionaries. The tests will then be named `TestDownload.test_YourExtractor`, `TestDownload.test_YourExtractor_1`, `TestDownload.test_YourExtractor_2`, etc.
-7. Have a look at [`youtube_dl/extractor/common.py`](https://github.com/rg3/youtube-dl/blob/master/youtube_dl/extractor/common.py) for possible helper methods and a [detailed description of what your extractor should and may return](https://github.com/rg3/youtube-dl/blob/master/youtube_dl/extractor/common.py#L62-L200). Add tests and code for as many as you want.
-8. If you can, check the code with [flake8](https://pypi.python.org/pypi/flake8).
-9. When the tests pass, [add](http://git-scm.com/docs/git-add) the new files and [commit](http://git-scm.com/docs/git-commit) them and [push](http://git-scm.com/docs/git-push) the result, like this:
+7. Have a look at [`youtube_dl/extractor/common.py`](https://github.com/rg3/youtube-dl/blob/master/youtube_dl/extractor/common.py) for possible helper methods and a [detailed description of what your extractor should and may return](https://github.com/rg3/youtube-dl/blob/58525c94d547be1c8167d16c298bdd75506db328/youtube_dl/extractor/common.py#L68-L226). Add tests and code for as many as you want.
+8. Keep in mind that the only mandatory fields in info dict for successful extraction process are `id`, `title` and either `url` or `formats`, i.e. these are the critical data the extraction does not make any sense without. This means that [any field](https://github.com/rg3/youtube-dl/blob/58525c94d547be1c8167d16c298bdd75506db328/youtube_dl/extractor/common.py#L138-L226) apart from aforementioned mandatory ones should be treated **as optional** and extraction should be **tolerate** to situations when sources for these fields can potentially be unavailable (even if they always available at the moment) and **future-proof** in order not to break the extraction of general purpose mandatory fields. For example, if you have some intermediate dict `meta` that is a source of metadata and it has a key `summary` that you want to extract and put into resulting info dict as `description`, you should be ready that this key may be missing from the `meta` dict, i.e. you should extract it as `meta.get('summary')` and not `meta['summary']`. Similarly, you should pass `fatal=False` when extracting data from a webpage with `_search_regex/_html_search_regex`.
+9. Check the code with [flake8](https://pypi.python.org/pypi/flake8).
+10. When the tests pass, [add](http://git-scm.com/docs/git-add) the new files and [commit](http://git-scm.com/docs/git-commit) them and [push](http://git-scm.com/docs/git-push) the result, like this:
 
         $ git add youtube_dl/extractor/__init__.py
         $ git add youtube_dl/extractor/yourextractor.py
         $ git commit -m '[yourextractor] Add new extractor'
         $ git push origin yourextractor
 
-10. Finally, [create a pull request](https://help.github.com/articles/creating-a-pull-request). We'll then review and merge it.
+11. Finally, [create a pull request](https://help.github.com/articles/creating-a-pull-request). We'll then review and merge it.
 
 In any case, thank you very much for your contributions!