From: Matt Corallo Date: Thu, 20 Sep 2018 16:57:47 +0000 (-0400) Subject: Make docs look nicer by adding explicit spacing X-Git-Tag: v0.0.12~302^2 X-Git-Url: http://git.bitcoin.ninja/index.cgi?a=commitdiff_plain;h=6e1318b0e28522244493c280f556e6749694b81e;p=rust-lightning Make docs look nicer by adding explicit spacing --- diff --git a/src/chain/chaininterface.rs b/src/chain/chaininterface.rs index c6b3b1b62..9999177de 100644 --- a/src/chain/chaininterface.rs +++ b/src/chain/chaininterface.rs @@ -1,6 +1,8 @@ //! Traits and utility impls which allow other parts of rust-lightning to interact with the -//! blockchain - receiving notifications of new blocks and block disconnections and allowing -//! rust-lightning to request that you monitor the chain for certain outpoints/transactions. +//! blockchain. +//! +//! Includes traits for monitoring and receiving notifications of new blocks and block +//! disconnections, transactio broadcasting, and feerate information requests. use bitcoin::blockdata::block::{Block, BlockHeader}; use bitcoin::blockdata::transaction::Transaction; @@ -28,6 +30,7 @@ pub enum ChainError { /// An interface to request notification of certain scripts as they appear the /// chain. +/// /// Note that all of the functions implemented here *must* be reentrant-safe (obviously - they're /// called from inside the library in response to ChainListener events, P2P events, or timer /// events). @@ -66,8 +69,10 @@ pub trait ChainListener: Sync + Send { /// Note that if a new transaction/outpoint is watched during a block_connected call, the block /// *must* be re-scanned with the new transaction/outpoints and block_connected should be /// called again with the same header and (at least) the new transactions. + /// /// Note that if non-new transaction/outpoints may be registered during a call, a second call /// *must not* happen. + /// /// This also means those counting confirmations using block_connected callbacks should watch /// for duplicate headers and not count them towards confirmations! fn block_connected(&self, header: &BlockHeader, height: u32, txn_matched: &[&Transaction], indexes_of_txn_matched: &[u32]); @@ -89,15 +94,19 @@ pub enum ConfirmationTarget { /// A trait which should be implemented to provide feerate information on a number of time /// horizons. +/// /// Note that all of the functions implemented here *must* be reentrant-safe (obviously - they're /// called from inside the library in response to ChainListener events, P2P events, or timer /// events). pub trait FeeEstimator: Sync + Send { - /// Gets estimated satoshis of fee required per 1000 Weight-Units. This translates to: - /// * satoshis-per-byte * 250 - /// * ceil(satoshis-per-kbyte / 4) + /// Gets estimated satoshis of fee required per 1000 Weight-Units. + /// /// Must be no smaller than 253 (ie 1 satoshi-per-byte rounded up to ensure later round-downs /// don't put us below 1 satoshi-per-byte). + /// + /// This translates to: + /// * satoshis-per-byte * 250 + /// * ceil(satoshis-per-kbyte / 4) fn get_est_sat_per_1000_weight(&self, confirmation_target: ConfirmationTarget) -> u64; } @@ -189,6 +198,7 @@ impl ChainWatchedUtil { } /// Utility to capture some common parts of ChainWatchInterface implementors. +/// /// Keeping a local copy of this in a ChainWatchInterface implementor is likely useful. pub struct ChainWatchInterfaceUtil { network: Network, @@ -247,6 +257,7 @@ impl ChainWatchInterfaceUtil { } /// Notify listeners that a block was connected given a full, unfiltered block. + /// /// Handles re-scanning the block and calling block_connected again if listeners register new /// watch data during the callbacks for you (see ChainListener::block_connected for more info). pub fn block_connected_with_filtering(&self, block: &Block, height: u32) { @@ -280,6 +291,7 @@ impl ChainWatchInterfaceUtil { /// Notify listeners that a block was connected, given pre-filtered list of transactions in the /// block which matched the filter (probably using does_match_tx). + /// /// Returns true if notified listeners registered additional watch data (implying that the /// block must be re-scanned and this function called again prior to further block_connected /// calls, see ChainListener::block_connected for more info). diff --git a/src/chain/mod.rs b/src/chain/mod.rs index 2919e08bf..95fdce817 100644 --- a/src/chain/mod.rs +++ b/src/chain/mod.rs @@ -1,5 +1,4 @@ -//! Module provides structs and traits which allow other parts of rust-lightning to interact with -//! the blockchain. +//! Structs and traits which allow other parts of rust-lightning to interact with the blockchain. pub mod chaininterface; pub mod transaction; diff --git a/src/chain/transaction.rs b/src/chain/transaction.rs index 73e08ea22..e8ebae709 100644 --- a/src/chain/transaction.rs +++ b/src/chain/transaction.rs @@ -4,6 +4,7 @@ use bitcoin::util::hash::Sha256dHash; use bitcoin::blockdata::transaction::OutPoint as BitcoinOutPoint; /// A reference to a transaction output. +/// /// Differs from bitcoin::blockdata::transaction::OutPoint as the index is a u16 instead of u32 /// due to LN's restrictions on index values. Should reduce (possibly) unsafe conversions this way. #[derive(Copy, Clone, PartialEq, Eq, PartialOrd, Ord, Debug, Hash)] diff --git a/src/ln/channelmanager.rs b/src/ln/channelmanager.rs index 01faec671..ba535d007 100644 --- a/src/ln/channelmanager.rs +++ b/src/ln/channelmanager.rs @@ -1,7 +1,9 @@ //! The top-level channel management and payment tracking stuff lives here. +//! //! The ChannelManager is the main chunk of logic implementing the lightning protocol and is //! responsible for tracking which channels are open, HTLCs are in flight and reestablishing those //! upon reconnect to the relevant peer(s). +//! //! It does not manage routing logic (see ln::router for that) nor does it manage constructing //! on-chain transactions (it only monitors the chain to watch for any force-closes that might //! imply it needs to fail HTLCs/payments/channels it manages). @@ -223,6 +225,7 @@ const ERR: () = "You need at least 32 bit pointers (well, usize, but we'll assum /// Manager which keeps track of a number of channels and sends messages to the appropriate /// channel, also tracking HTLC preimages and forwarding onion packets appropriately. +/// /// Implements ChannelMessageHandler, handling the multi-channel parts and passing things through /// to individual Channels. pub struct ChannelManager { @@ -285,10 +288,14 @@ pub struct ChannelDetails { } impl ChannelManager { - /// Constructs a new ChannelManager to hold several channels and route between them. This is - /// the main "logic hub" for all channel-related actions, and implements ChannelMessageHandler. + /// Constructs a new ChannelManager to hold several channels and route between them. + /// + /// This is the main "logic hub" for all channel-related actions, and implements + /// ChannelMessageHandler. + /// /// fee_proportional_millionths is an optional fee to charge any payments routed through us. /// Non-proportional fees are fixed according to our risk using the provided fee estimator. + /// /// panics if channel_value_satoshis is >= `MAX_FUNDING_SATOSHIS`! pub fn new(our_network_key: SecretKey, fee_proportional_millionths: u32, announce_channels_publicly: bool, network: Network, feeest: Arc, monitor: Arc, chain_monitor: Arc, tx_broadcaster: Arc, logger: Arc) -> Result, secp256k1::Error> { let secp_ctx = Secp256k1::new(); @@ -324,12 +331,15 @@ impl ChannelManager { } /// Creates a new outbound channel to the given remote node and with the given value. + /// /// user_id will be provided back as user_channel_id in FundingGenerationReady and /// FundingBroadcastSafe events to allow tracking of which events correspond with which /// create_channel call. Note that user_channel_id defaults to 0 for inbound channels, so you /// may wish to avoid using 0 for user_id here. + /// /// If successful, will generate a SendOpenChannel event, so you should probably poll /// PeerManager::process_events afterwards. + /// /// Raises APIError::APIMisuseError when channel_value_satoshis > 2**24 or push_msat being greater than channel_value_satoshis * 1k pub fn create_channel(&self, their_network_key: PublicKey, channel_value_satoshis: u64, push_msat: u64, user_id: u64) -> Result<(), APIError> { let chan_keys = if cfg!(feature = "fuzztarget") { @@ -407,6 +417,7 @@ impl ChannelManager { /// Begins the process of closing a channel. After this call (plus some timeout), no new HTLCs /// will be accepted on the given channel, and after additional timeout/the closing of all /// pending HTLCs, the channel will be closed on chain. + /// /// May generate a SendShutdown event on success, which should be relayed. pub fn close_channel(&self, channel_id: &[u8; 32]) -> Result<(), HandleError> { let (mut res, node_id, chan_option) = { @@ -947,16 +958,19 @@ impl ChannelManager { } /// Sends a payment along a given route. + /// /// Value parameters are provided via the last hop in route, see documentation for RouteHop /// fields for more info. + /// /// Note that if the payment_hash already exists elsewhere (eg you're sending a duplicative /// payment), we don't do anything to stop you! We always try to ensure that if the provided /// next hop knows the preimage to payment_hash they can claim an additional amount as /// specified in the last hop in the route! Thus, you should probably do your own /// payment_preimage tracking (which you should already be doing as they represent "proof of /// payment") and prevent double-sends yourself. - /// See-also docs on Channel::send_htlc_and_commit. + /// /// May generate a SendHTLCs event on success, which should be relayed. + /// /// Raises APIError::RoutError when invalid route or forward parameter /// (cltv_delta, fee, node public key) is specified pub fn send_payment(&self, route: Route, payment_hash: [u8; 32]) -> Result<(), APIError> { @@ -1033,7 +1047,9 @@ impl ChannelManager { } /// Call this upon creation of a funding transaction for the given channel. + /// /// Panics if a funding transaction has already been provided for this channel. + /// /// May panic if the funding_txo is duplicative with some other channel (note that this should /// be trivially prevented by using unique funding transaction keys per-channel). pub fn funding_transaction_generated(&self, temporary_channel_id: &[u8; 32], funding_txo: OutPoint) { @@ -1107,6 +1123,7 @@ impl ChannelManager { } /// Processes HTLCs which are pending waiting on random forward delay. + /// /// Should only really ever be called in response to an PendingHTLCsForwardable event. /// Will likely generate further events. pub fn process_pending_htlc_forwards(&self) { @@ -1323,6 +1340,7 @@ impl ChannelManager { /// Provides a payment preimage in response to a PaymentReceived event, returning true and /// generating message events for the net layer to claim the payment, if possible. Thus, you /// should probably kick the net layer to go send messages if this returns true! + /// /// May panic if called except in response to a PaymentReceived event. pub fn claim_funds(&self, payment_preimage: [u8; 32]) -> bool { let mut sha = Sha256::new(); diff --git a/src/ln/channelmonitor.rs b/src/ln/channelmonitor.rs index acd63da79..f3c5c89f6 100644 --- a/src/ln/channelmonitor.rs +++ b/src/ln/channelmonitor.rs @@ -1,8 +1,10 @@ //! The logic to monitor for on-chain transactions and create the relevant claim responses lives //! here. +//! //! ChannelMonitor objects are generated by ChannelManager in response to relevant //! messages/actions, and MUST be persisted to disk (and, preferably, remotely) before progress can //! be made in responding to certain messages, see ManyChannelMonitor for more. +//! //! Note that ChannelMonitors are an important part of the lightning trust model and a copy of the //! latest ChannelMonitor must always be actively monitoring for chain updates (and no out-of-date //! ChannelMonitors should do so). Thus, if you're building rust-lightning into an HSM or other @@ -40,6 +42,7 @@ use std::{hash,cmp}; pub enum ChannelMonitorUpdateErr { /// Used to indicate a temporary failure (eg connection to a watchtower failed, but is expected /// to succeed at some point in the future). + /// /// Such a failure will "freeze" a channel, preventing us from revoking old states or /// submitting new commitment transactions to the remote party. /// ChannelManager::test_restore_channel_monitor can be used to retry the update(s) and restore @@ -55,12 +58,14 @@ pub enum ChannelMonitorUpdateErr { /// them. Generally should be implemented by keeping a local SimpleManyChannelMonitor and passing /// events to it, while also taking any add_update_monitor events and passing them to some remote /// server(s). +/// /// Note that any updates to a channel's monitor *must* be applied to each instance of the /// channel's monitor everywhere (including remote watchtowers) *before* this function returns. If /// an update occurs and a remote watchtower is left with old state, it may broadcast transactions /// which we have revoked, allowing our counterparty to claim all funds in the channel! pub trait ManyChannelMonitor: Send + Sync { /// Adds or updates a monitor for the given `funding_txo`. + /// /// Implementor must also ensure that the funding_txo outpoint is registered with any relevant /// ChainWatchInterfaces such that the provided monitor receives block_connected callbacks with /// any spends of it. @@ -69,10 +74,13 @@ pub trait ManyChannelMonitor: Send + Sync { /// A simple implementation of a ManyChannelMonitor and ChainListener. Can be used to create a /// watchtower or watch our own channels. +/// /// Note that you must provide your own key by which to refer to channels. +/// /// If you're accepting remote monitors (ie are implementing a watchtower), you must verify that /// users cannot overwrite a given channel by providing a duplicate key. ie you should probably /// index by a PublicKey which is required to sign any updates. +/// /// If you're using this for local monitoring of your own channels, you probably want to use /// `OutPoint` as the key, which will give you a ManyChannelMonitor implementation. pub struct SimpleManyChannelMonitor { @@ -180,6 +188,7 @@ const MIN_SERIALIZATION_VERSION: u8 = 1; /// A ChannelMonitor handles chain events (blocks connected and disconnected) and generates /// on-chain transactions to ensure no loss of funds occurs. +/// /// You MUST ensure that no ChannelMonitors for a given channel anywhere contain out-of-date /// information and are actively monitoring the chain. pub struct ChannelMonitor { diff --git a/src/ln/mod.rs b/src/ln/mod.rs index 0f3b74544..ca8acd50d 100644 --- a/src/ln/mod.rs +++ b/src/ln/mod.rs @@ -1,8 +1,10 @@ //! High level lightning structs and impls live here. +//! //! You probably want to create a channelmanager::ChannelManager, and a router::Router first. //! Then, you probably want to pass them both on to a peer_handler::PeerManager and use that to //! create/manage connections and call get_and_clear_pending_events after each action, handling //! them appropriately. +//! //! When you want to open/close a channel or send a payment, call into your ChannelManager and when //! you want to learn things about the network topology (eg get a route for sending a payment), //! call into your Router. diff --git a/src/ln/msgs.rs b/src/ln/msgs.rs index f87e3722f..7513aa797 100644 --- a/src/ln/msgs.rs +++ b/src/ln/msgs.rs @@ -1,9 +1,11 @@ //! Wire messages, traits representing wire message handlers, and a few error types live here. +//! //! For a normal node you probably don't need to use anything here, however, if you wish to split a //! node into an internet-facing route/message socket handling daemon and a separate daemon (or //! server entirely) which handles only channel-related messages you may wish to implement //! ChannelMessageHandler yourself and use it to re-serialize messages and pass them across //! daemons/servers. +//! //! Note that if you go with such an architecture (instead of passing raw socket events to a //! non-internet-facing system) you trust the frontend internet-facing system to not lie about the //! source node_id of the mssage, however this does allow you to significantly reduce bandwidth @@ -484,9 +486,10 @@ pub enum HTLCFailChannelUpdate { }, } -/// A trait to describe an object which can receive channel messages. Messages MAY be called in -/// parallel when they originate from different their_node_ids, however they MUST NOT be called in -/// parallel when the two calls have the same their_node_id. +/// A trait to describe an object which can receive channel messages. +/// +/// Messages MAY be called in parallel when they originate from different their_node_ids, however +/// they MUST NOT be called in parallel when the two calls have the same their_node_id. pub trait ChannelMessageHandler : events::EventsProvider + Send + Sync { //Channel init: /// Handle an incoming open_channel message from the given peer. diff --git a/src/ln/peer_handler.rs b/src/ln/peer_handler.rs index 797c55191..13d3f1a68 100644 --- a/src/ln/peer_handler.rs +++ b/src/ln/peer_handler.rs @@ -1,4 +1,5 @@ //! Top level peer message handling and socket handling logic lives here. +//! //! Instead of actually servicing sockets ourselves we require that you implement the //! SocketDescriptor interface and use that to receive actions which you should perform on the //! socket, and call into PeerManager with bytes read from the socket. The PeerManager will then @@ -32,7 +33,9 @@ pub struct MessageHandler { /// Provides an object which can be used to send data to and which uniquely identifies a connection /// to a remote host. You will need to be able to generate multiple of these which meet Eq and /// implement Hash to meet the PeerManager API. +/// /// For efficiency, Clone should be relatively cheap for this type. +/// /// You probably want to just extend an int and put a file descriptor in a struct and implement /// send_data. Note that if you are using a higher-level net library that may close() itself, be /// careful to ensure you don't have races whereby you might register a new connection with an fd @@ -42,9 +45,11 @@ pub trait SocketDescriptor : cmp::Eq + hash::Hash + Clone { /// Returns the amount of data which was sent, possibly 0 if the socket has since disconnected. /// Note that in the disconnected case, a disconnect_event must still fire and further write /// attempts may occur until that time. + /// /// If the returned size is smaller than data.len() - write_offset, a write_available event must /// trigger the next time more data can be written. Additionally, until the a send_data event /// completes fully, no further read_events should trigger on the same peer! + /// /// If a read_event on this descriptor had previously returned true (indicating that read /// events should be paused to prevent DoS in the send buffer), resume_read may be set /// indicating that read events on this descriptor should resume. A resume_read of false does @@ -167,6 +172,7 @@ impl PeerManager { } /// Get the list of node ids for peers which have completed the initial handshake. + /// /// For outbound connections, this will be the same as the their_node_id parameter passed in to /// new_outbound_connection, however entries will only appear once the initial handshake has /// completed and we are sure the remote peer has the private key for the given node_id. @@ -183,7 +189,9 @@ impl PeerManager { /// Indicates a new outbound connection has been established to a node with the given node_id. /// Note that if an Err is returned here you MUST NOT call disconnect_event for the new /// descriptor but must disconnect the connection immediately. + /// /// Returns some bytes to send to the remote node. + /// /// Panics if descriptor is duplicative with some other descriptor which has not yet has a /// disconnect_event. pub fn new_outbound_connection(&self, their_node_id: PublicKey, descriptor: Descriptor) -> Result, PeerHandleError> { @@ -213,10 +221,12 @@ impl PeerManager { } /// Indicates a new inbound connection has been established. + /// /// May refuse the connection by returning an Err, but will never write bytes to the remote end /// (outbound connector always speaks first). Note that if an Err is returned here you MUST NOT /// call disconnect_event for the new descriptor but must disconnect the connection /// immediately. + /// /// Panics if descriptor is duplicative with some other descriptor which has not yet has a /// disconnect_event. pub fn new_inbound_connection(&self, descriptor: Descriptor) -> Result<(), PeerHandleError> { @@ -266,12 +276,14 @@ impl PeerManager { } /// Indicates that there is room to write data to the given socket descriptor. + /// /// May return an Err to indicate that the connection should be closed. + /// /// Will most likely call send_data on the descriptor passed in (or the descriptor handed into - /// new_*_connection) before returning. Thus, be very careful with reentrancy issues! The + /// new_*\_connection) before returning. Thus, be very careful with reentrancy issues! The /// invariants around calling write_event in case a write did not fully complete must still /// hold - be ready to call write_event again if a write call generated here isn't sufficient! - /// Panics if the descriptor was not previously registered in a new_*_connection event. + /// Panics if the descriptor was not previously registered in a new_\*_connection event. pub fn write_event(&self, descriptor: &mut Descriptor) -> Result<(), PeerHandleError> { let mut peers = self.peers.lock().unwrap(); match peers.peers.get_mut(descriptor) { @@ -285,16 +297,20 @@ impl PeerManager { } /// Indicates that data was read from the given socket descriptor. + /// /// May return an Err to indicate that the connection should be closed. + /// /// Will very likely call send_data on the descriptor passed in (or a descriptor handed into /// new_*_connection) before returning. Thus, be very careful with reentrancy issues! The /// invariants around calling write_event in case a write did not fully complete must still /// hold. Note that this function will often call send_data on many peers before returning, not /// just this peer! + /// /// If Ok(true) is returned, further read_events should not be triggered until a write_event on /// this file descriptor has resume_read set (preventing DoS issues in the send buffer). Note /// that this must be true even if a send_data call with resume_read=true was made during the /// course of this function! + /// /// Panics if the descriptor was not previously registered in a new_*_connection event. pub fn read_event(&self, peer_descriptor: &mut Descriptor, data: Vec) -> Result { match self.do_read_event(peer_descriptor, data) { @@ -935,8 +951,10 @@ impl PeerManager { } /// Indicates that the given socket descriptor's connection is now closed. + /// /// This must be called even if a PeerHandleError was given for a read_event or write_event, - /// but must NOT be called if a PeerHandleError was provided out of a new_*_connection event! + /// but must NOT be called if a PeerHandleError was provided out of a new_\*\_connection event! + /// /// Panics if the descriptor was not previously registered in a successful new_*_connection event. pub fn disconnect_event(&self, descriptor: &Descriptor) { self.disconnect_event_internal(descriptor, false); diff --git a/src/ln/router.rs b/src/ln/router.rs index 16f996df0..4a55df88c 100644 --- a/src/ln/router.rs +++ b/src/ln/router.rs @@ -1,4 +1,5 @@ //! The top-level routing/network map tracking logic lives here. +//! //! You probably want to create a Router and use that as your RoutingMessageHandler and then //! interrogate it to get routes for your own payments. @@ -523,13 +524,18 @@ impl Router { } /// Gets a route from us to the given target node. + /// /// Extra routing hops between known nodes and the target will be used if they are included in /// last_hops. + /// /// If some channels aren't announced, it may be useful to fill in a first_hops with the /// results from a local ChannelManager::list_usable_channels() call. If it is filled in, our /// (this Router's) view of our local channels will be ignored, and only those in first_hops - /// will be used. Panics if first_hops contains channels without short_channel_ids + /// will be used. + /// + /// Panics if first_hops contains channels without short_channel_ids /// (ChannelManager::list_usable_channels will never include such channels). + /// /// The fees on channels from us to next-hops are ignored (as they are assumed to all be /// equal), however the enabled/disabled bit on such channels as well as the htlc_minimum_msat /// *is* checked as they may change based on the receiving node. diff --git a/src/util/events.rs b/src/util/events.rs index a33644d06..22721729b 100644 --- a/src/util/events.rs +++ b/src/util/events.rs @@ -1,5 +1,6 @@ //! Events are returned from various bits in the library which indicate some action must be taken //! by the client. +//! //! Because we don't have a built-in runtime, its up to the client to call events at a time in the //! future, as well as generate and broadcast funding transactions handle payment preimages and a //! few other things. @@ -82,6 +83,7 @@ pub enum Event { // TODO: Move these into a separate struct and make a top-level enum /// Used to indicate that we've initialted a channel open and should send the open_channel /// message provided to the given peer. + /// /// This event is handled by PeerManager::process_events if you are using a PeerManager. SendOpenChannel { /// The node_id of the node which should receive this message @@ -90,6 +92,7 @@ pub enum Event { msg: msgs::OpenChannel, }, /// Used to indicate that a funding_created message should be sent to the peer with the given node_id. + /// /// This event is handled by PeerManager::process_events if you are using a PeerManager. SendFundingCreated { /// The node_id of the node which should receive this message @@ -98,6 +101,7 @@ pub enum Event { msg: msgs::FundingCreated, }, /// Used to indicate that a funding_locked message should be sent to the peer with the given node_id. + /// /// This event is handled by PeerManager::process_events if you are using a PeerManager. SendFundingLocked { /// The node_id of the node which should receive these message(s) @@ -109,6 +113,7 @@ pub enum Event { }, /// Used to indicate that a series of HTLC update messages, as well as a commitment_signed /// message should be sent to the peer with the given node_id. + /// /// This event is handled by PeerManager::process_events if you are using a PeerManager. UpdateHTLCs { /// The node_id of the node which should receive these message(s) @@ -117,6 +122,7 @@ pub enum Event { updates: msgs::CommitmentUpdate, }, /// Used to indicate that a shutdown message should be sent to the peer with the given node_id. + /// /// This event is handled by PeerManager::process_events if you are using a PeerManager. SendShutdown { /// The node_id of the node which should receive this message @@ -126,6 +132,7 @@ pub enum Event { }, /// Used to indicate that a channel_announcement and channel_update should be broadcast to all /// peers (except the peer with node_id either msg.contents.node_id_1 or msg.contents.node_id_2). + /// /// This event is handled by PeerManager::process_events if you are using a PeerManager. BroadcastChannelAnnouncement { /// The channel_announcement which should be sent. @@ -134,6 +141,7 @@ pub enum Event { update_msg: msgs::ChannelUpdate, }, /// Used to indicate that a channel_update should be broadcast to all peers. + /// /// This event is handled by PeerManager::process_events if you are using a PeerManager. BroadcastChannelUpdate { /// The channel_update which should be sent. @@ -142,6 +150,7 @@ pub enum Event { //Error handling /// Broadcast an error downstream to be handled + /// /// This event is handled by PeerManager::process_events if you are using a PeerManager. HandleError { /// The node_id of the node which should receive this message