}
impl_writeable!(HTLCUpdate, 0, { payment_hash, payment_preimage, source });
-/// Simple trait indicating ability to track a set of ChannelMonitors and multiplex events between
-/// them. Generally should be implemented by keeping a local SimpleManyChannelMonitor and passing
-/// events to it, while also taking any add/update_monitor events and passing them to some remote
-/// server(s).
-///
-/// In general, you must always have at least one local copy in memory, which must never fail to
-/// update (as it is responsible for broadcasting the latest state in case the channel is closed),
-/// and then persist it to various on-disk locations. If, for some reason, the in-memory copy fails
-/// to update (eg out-of-memory or some other condition), you must immediately shut down without
-/// taking any further action such as writing the current state to disk. This should likely be
-/// accomplished via panic!() or abort().
-///
-/// Note that any updates to a channel's monitor *must* be applied to each instance of the
-/// channel's monitor everywhere (including remote watchtowers) *before* this function returns. If
-/// an update occurs and a remote watchtower is left with old state, it may broadcast transactions
-/// which we have revoked, allowing our counterparty to claim all funds in the channel!
-///
-/// User needs to notify implementors of ManyChannelMonitor when a new block is connected or
-/// disconnected using their `block_connected` and `block_disconnected` methods. However, rather
-/// than calling these methods directly, the user should register implementors as listeners to the
-/// BlockNotifier and call the BlockNotifier's `block_(dis)connected` methods, which will notify
-/// all registered listeners in one go.
-pub trait ManyChannelMonitor<ChanSigner: ChannelKeys>: Send + Sync {
- /// Adds a monitor for the given `funding_txo`.
- ///
- /// Implementer must also ensure that the funding_txo txid *and* outpoint are registered with
- /// any relevant ChainWatchInterfaces such that the provided monitor receives block_connected
- /// callbacks with the funding transaction, or any spends of it.
- ///
- /// Further, the implementer must also ensure that each output returned in
- /// monitor.get_outputs_to_watch() is registered to ensure that the provided monitor learns about
- /// any spends of any of the outputs.
- ///
- /// Any spends of outputs which should have been registered which aren't passed to
- /// ChannelMonitors via block_connected may result in FUNDS LOSS.
- fn add_monitor(&self, funding_txo: OutPoint, monitor: ChannelMonitor<ChanSigner>) -> Result<(), ChannelMonitorUpdateErr>;
-
- /// Updates a monitor for the given `funding_txo`.
- ///
- /// Implementer must also ensure that the funding_txo txid *and* outpoint are registered with
- /// any relevant ChainWatchInterfaces such that the provided monitor receives block_connected
- /// callbacks with the funding transaction, or any spends of it.
- ///
- /// Further, the implementer must also ensure that each output returned in
- /// monitor.get_watch_outputs() is registered to ensure that the provided monitor learns about
- /// any spends of any of the outputs.
- ///
- /// Any spends of outputs which should have been registered which aren't passed to
- /// ChannelMonitors via block_connected may result in FUNDS LOSS.
- fn update_monitor(&self, funding_txo: OutPoint, monitor: ChannelMonitorUpdate) -> Result<(), ChannelMonitorUpdateErr>;
-
- /// Used by ChannelManager to get list of HTLC resolved onchain and which needed to be updated
- /// with success or failure.
- ///
- /// You should probably just call through to
- /// ChannelMonitor::get_and_clear_pending_htlcs_updated() for each ChannelMonitor and return
- /// the full list.
- fn get_and_clear_pending_htlcs_updated(&self) -> Vec<HTLCUpdate>;
-}
-
/// A simple implementation of a ManyChannelMonitor and ChainListener. Can be used to create a
/// watchtower or watch our own channels.
///
}
}
-impl<ChanSigner: ChannelKeys, T: Deref + Sync + Send, F: Deref + Sync + Send, L: Deref + Sync + Send, C: Deref + Sync + Send> ManyChannelMonitor<ChanSigner> for SimpleManyChannelMonitor<OutPoint, ChanSigner, T, F, L, C>
+impl<ChanSigner: ChannelKeys, T: Deref + Sync + Send, F: Deref + Sync + Send, L: Deref + Sync + Send, C: Deref + Sync + Send> ManyChannelMonitor for SimpleManyChannelMonitor<OutPoint, ChanSigner, T, F, L, C>
where T::Target: BroadcasterInterface,
F::Target: FeeEstimator,
L::Target: Logger,
C::Target: ChainWatchInterface,
{
+ type Keys = ChanSigner;
+
fn add_monitor(&self, funding_txo: OutPoint, monitor: ChannelMonitor<ChanSigner>) -> Result<(), ChannelMonitorUpdateErr> {
match self.add_monitor_by_key(funding_txo, monitor) {
Ok(_) => Ok(()),
per_htlc: HashMap<Txid, Vec<HTLCOutputInCommitment>>
}
+impl Writeable for RemoteCommitmentTransaction {
+ fn write<W: Writer>(&self, w: &mut W) -> Result<(), ::std::io::Error> {
+ self.remote_delayed_payment_base_key.write(w)?;
+ self.remote_htlc_base_key.write(w)?;
+ w.write_all(&byte_utils::be16_to_array(self.on_remote_tx_csv))?;
+ w.write_all(&byte_utils::be64_to_array(self.per_htlc.len() as u64))?;
+ for (ref txid, ref htlcs) in self.per_htlc.iter() {
+ w.write_all(&txid[..])?;
+ w.write_all(&byte_utils::be64_to_array(htlcs.len() as u64))?;
+ for &ref htlc in htlcs.iter() {
+ htlc.write(w)?;
+ }
+ }
+ Ok(())
+ }
+}
+impl Readable for RemoteCommitmentTransaction {
+ fn read<R: ::std::io::Read>(r: &mut R) -> Result<Self, DecodeError> {
+ let remote_commitment_transaction = {
+ let remote_delayed_payment_base_key = Readable::read(r)?;
+ let remote_htlc_base_key = Readable::read(r)?;
+ let on_remote_tx_csv: u16 = Readable::read(r)?;
+ let per_htlc_len: u64 = Readable::read(r)?;
+ let mut per_htlc = HashMap::with_capacity(cmp::min(per_htlc_len as usize, MAX_ALLOC_SIZE / 64));
+ for _ in 0..per_htlc_len {
+ let txid: Txid = Readable::read(r)?;
+ let htlcs_count: u64 = Readable::read(r)?;
+ let mut htlcs = Vec::with_capacity(cmp::min(htlcs_count as usize, MAX_ALLOC_SIZE / 32));
+ for _ in 0..htlcs_count {
+ let htlc = Readable::read(r)?;
+ htlcs.push(htlc);
+ }
+ if let Some(_) = per_htlc.insert(txid, htlcs) {
+ return Err(DecodeError::InvalidValue);
+ }
+ }
+ RemoteCommitmentTransaction {
+ remote_delayed_payment_base_key,
+ remote_htlc_base_key,
+ on_remote_tx_csv,
+ per_htlc,
+ }
+ };
+ Ok(remote_commitment_transaction)
+ }
+}
+
/// When ChannelMonitor discovers an onchain outpoint being a step of a channel and that it needs
/// to generate a tx to push channel state forward, we cache outpoint-solving tx material to build
/// a new bumped one in case of lenghty confirmation delay
secp_ctx: Secp256k1<secp256k1::All>, //TODO: dedup this a bit...
}
+/// Simple trait indicating ability to track a set of ChannelMonitors and multiplex events between
+/// them. Generally should be implemented by keeping a local SimpleManyChannelMonitor and passing
+/// events to it, while also taking any add/update_monitor events and passing them to some remote
+/// server(s).
+///
+/// In general, you must always have at least one local copy in memory, which must never fail to
+/// update (as it is responsible for broadcasting the latest state in case the channel is closed),
+/// and then persist it to various on-disk locations. If, for some reason, the in-memory copy fails
+/// to update (eg out-of-memory or some other condition), you must immediately shut down without
+/// taking any further action such as writing the current state to disk. This should likely be
+/// accomplished via panic!() or abort().
+///
+/// Note that any updates to a channel's monitor *must* be applied to each instance of the
+/// channel's monitor everywhere (including remote watchtowers) *before* this function returns. If
+/// an update occurs and a remote watchtower is left with old state, it may broadcast transactions
+/// which we have revoked, allowing our counterparty to claim all funds in the channel!
+///
+/// User needs to notify implementors of ManyChannelMonitor when a new block is connected or
+/// disconnected using their `block_connected` and `block_disconnected` methods. However, rather
+/// than calling these methods directly, the user should register implementors as listeners to the
+/// BlockNotifier and call the BlockNotifier's `block_(dis)connected` methods, which will notify
+/// all registered listeners in one go.
+pub trait ManyChannelMonitor: Send + Sync {
+ /// The concrete type which signs for transactions and provides access to our channel public
+ /// keys.
+ type Keys: ChannelKeys;
+
+ /// Adds a monitor for the given `funding_txo`.
+ ///
+ /// Implementer must also ensure that the funding_txo txid *and* outpoint are registered with
+ /// any relevant ChainWatchInterfaces such that the provided monitor receives block_connected
+ /// callbacks with the funding transaction, or any spends of it.
+ ///
+ /// Further, the implementer must also ensure that each output returned in
+ /// monitor.get_outputs_to_watch() is registered to ensure that the provided monitor learns about
+ /// any spends of any of the outputs.
+ ///
+ /// Any spends of outputs which should have been registered which aren't passed to
+ /// ChannelMonitors via block_connected may result in FUNDS LOSS.
+ fn add_monitor(&self, funding_txo: OutPoint, monitor: ChannelMonitor<Self::Keys>) -> Result<(), ChannelMonitorUpdateErr>;
+
+ /// Updates a monitor for the given `funding_txo`.
+ ///
+ /// Implementer must also ensure that the funding_txo txid *and* outpoint are registered with
+ /// any relevant ChainWatchInterfaces such that the provided monitor receives block_connected
+ /// callbacks with the funding transaction, or any spends of it.
+ ///
+ /// Further, the implementer must also ensure that each output returned in
+ /// monitor.get_watch_outputs() is registered to ensure that the provided monitor learns about
+ /// any spends of any of the outputs.
+ ///
+ /// Any spends of outputs which should have been registered which aren't passed to
+ /// ChannelMonitors via block_connected may result in FUNDS LOSS.
+ fn update_monitor(&self, funding_txo: OutPoint, monitor: ChannelMonitorUpdate) -> Result<(), ChannelMonitorUpdateErr>;
+
+ /// Used by ChannelManager to get list of HTLC resolved onchain and which needed to be updated
+ /// with success or failure.
+ ///
+ /// You should probably just call through to
+ /// ChannelMonitor::get_and_clear_pending_htlcs_updated() for each ChannelMonitor and return
+ /// the full list.
+ fn get_and_clear_pending_htlcs_updated(&self) -> Vec<HTLCUpdate>;
+}
+
#[cfg(any(test, feature = "fuzztarget"))]
/// Used only in testing and fuzztarget to check serialization roundtrips don't change the
/// underlying object
self.current_remote_commitment_txid.write(writer)?;
self.prev_remote_commitment_txid.write(writer)?;
- self.remote_tx_cache.remote_delayed_payment_base_key.write(writer)?;
- self.remote_tx_cache.remote_htlc_base_key.write(writer)?;
- writer.write_all(&byte_utils::be16_to_array(self.remote_tx_cache.on_remote_tx_csv))?;
- writer.write_all(&byte_utils::be64_to_array(self.remote_tx_cache.per_htlc.len() as u64))?;
- for (ref txid, ref htlcs) in self.remote_tx_cache.per_htlc.iter() {
- writer.write_all(&txid[..])?;
- writer.write_all(&byte_utils::be64_to_array(htlcs.len() as u64))?;
- for &ref htlc in htlcs.iter() {
- htlc.write(writer)?;
- }
- }
+ self.remote_tx_cache.write(writer)?;
self.funding_redeemscript.write(writer)?;
self.channel_value_satoshis.write(writer)?;
break;
}
} else if self.remote_payment_script == outp.script_pubkey {
- spendable_output = Some(SpendableOutputDescriptor::DynamicOutputP2WPKH {
+ spendable_output = Some(SpendableOutputDescriptor::StaticOutputRemotePayment {
outpoint: BitcoinOutPoint { txid: tx.txid(), vout: i as u32 },
output: outp.clone(),
key_derivation_params: self.keys.key_derivation_params(),
let current_remote_commitment_txid = Readable::read(reader)?;
let prev_remote_commitment_txid = Readable::read(reader)?;
- let remote_tx_cache = {
- let remote_delayed_payment_base_key = Readable::read(reader)?;
- let remote_htlc_base_key = Readable::read(reader)?;
- let on_remote_tx_csv: u16 = Readable::read(reader)?;
- let per_htlc_len: u64 = Readable::read(reader)?;
- let mut per_htlc = HashMap::with_capacity(cmp::min(per_htlc_len as usize, MAX_ALLOC_SIZE / 64));
- for _ in 0..per_htlc_len {
- let txid: Txid = Readable::read(reader)?;
- let htlcs_count: u64 = Readable::read(reader)?;
- let mut htlcs = Vec::with_capacity(cmp::min(htlcs_count as usize, MAX_ALLOC_SIZE / 32));
- for _ in 0..htlcs_count {
- let htlc = Readable::read(reader)?;
- htlcs.push(htlc);
- }
- if let Some(_) = per_htlc.insert(txid, htlcs) {
- return Err(DecodeError::InvalidValue);
- }
- }
- RemoteCommitmentTransaction {
- remote_delayed_payment_base_key,
- remote_htlc_base_key,
- on_remote_tx_csv,
- per_htlc,
- }
- };
+ let remote_tx_cache = Readable::read(reader)?;
let funding_redeemscript = Readable::read(reader)?;
let channel_value_satoshis = Readable::read(reader)?;