use crate::chain::transaction::OutPoint;
use crate::sign::{ecdsa::EcdsaChannelSigner, EntropySource, OutputSpender, SignerProvider};
use crate::events::{Event, MessageSendEvent, MessageSendEventsProvider, PathFailure, PaymentPurpose, ClosureReason, HTLCDestination, PaymentFailureReason};
-use crate::ln::{ChannelId, PaymentPreimage, PaymentSecret, PaymentHash};
+use crate::ln::types::{ChannelId, PaymentPreimage, PaymentSecret, PaymentHash};
use crate::ln::channel::{commitment_tx_base_weight, COMMITMENT_TX_WEIGHT_PER_HTLC, CONCURRENT_INBOUND_HTLC_FEE_BUFFER, FEE_SPIKE_BUFFER_FEE_INCREASE_MULTIPLE, MIN_AFFORDABLE_HTLC_COUNT, get_holder_selected_channel_reserve_satoshis, OutboundV1Channel, InboundV1Channel, COINBASE_MATURITY, ChannelPhase};
use crate::ln::channelmanager::{self, PaymentId, RAACommitmentOrder, PaymentSendFailure, RecipientOnionFields, BREAKDOWN_TIMEOUT, ENABLE_GOSSIP_TICKS, DISABLE_GOSSIP_TICKS, MIN_CLTV_EXPIRY_DELTA};
use crate::ln::channel::{DISCONNECT_PEER_AWAITING_RESPONSE_TICKS, ChannelError};
do_test_max_dust_htlc_exposure_by_threshold_type(true, true);
}
+#[test]
+fn test_nondust_htlc_fees_are_dust() {
+ // Test that the transaction fees paid in nondust HTLCs count towards our dust limit
+ let chanmon_cfgs = create_chanmon_cfgs(3);
+ let node_cfgs = create_node_cfgs(3, &chanmon_cfgs);
+
+ let mut config = test_default_channel_config();
+ // Set the dust limit to the default value
+ config.channel_config.max_dust_htlc_exposure =
+ MaxDustHTLCExposure::FeeRateMultiplier(10_000);
+ // Make sure the HTLC limits don't get in the way
+ config.channel_handshake_limits.min_max_accepted_htlcs = 400;
+ config.channel_handshake_config.our_max_accepted_htlcs = 400;
+ config.channel_handshake_config.our_htlc_minimum_msat = 1;
+
+ let node_chanmgrs = create_node_chanmgrs(3, &node_cfgs, &[Some(config), Some(config), Some(config)]);
+ let nodes = create_network(3, &node_cfgs, &node_chanmgrs);
+
+ // Create a channel from 1 -> 0 but immediately push all of the funds towards 0
+ let chan_id_1 = create_announced_chan_between_nodes(&nodes, 1, 0).2;
+ while nodes[1].node.list_channels()[0].next_outbound_htlc_limit_msat > 0 {
+ send_payment(&nodes[1], &[&nodes[0]], nodes[1].node.list_channels()[0].next_outbound_htlc_limit_msat);
+ }
+
+ // First get the channel one HTLC_VALUE HTLC away from the dust limit by sending dust HTLCs
+ // repeatedly until we run out of space.
+ const HTLC_VALUE: u64 = 1_000_000; // Doesn't matter, tune until the test passes
+ let payment_preimage = route_payment(&nodes[0], &[&nodes[1]], HTLC_VALUE).0;
+
+ while nodes[0].node.list_channels()[0].next_outbound_htlc_minimum_msat == 0 {
+ route_payment(&nodes[0], &[&nodes[1]], HTLC_VALUE);
+ }
+ assert_ne!(nodes[0].node.list_channels()[0].next_outbound_htlc_limit_msat, 0,
+ "We don't want to run out of ability to send because of some non-dust limit");
+ assert!(nodes[0].node.list_channels()[0].pending_outbound_htlcs.len() < 10,
+ "We should be able to fill our dust limit without too many HTLCs");
+
+ let dust_limit = nodes[0].node.list_channels()[0].next_outbound_htlc_minimum_msat;
+ claim_payment(&nodes[0], &[&nodes[1]], payment_preimage);
+ assert_ne!(nodes[0].node.list_channels()[0].next_outbound_htlc_minimum_msat, 0,
+ "Make sure we are able to send once we clear one HTLC");
+
+ // At this point we have somewhere between dust_limit and dust_limit * 2 left in our dust
+ // exposure limit, and we want to max that out using non-dust HTLCs.
+ let commitment_tx_per_htlc_cost =
+ htlc_success_tx_weight(&ChannelTypeFeatures::empty()) * 253;
+ let max_htlcs_remaining = dust_limit * 2 / commitment_tx_per_htlc_cost;
+ assert!(max_htlcs_remaining < 30,
+ "We should be able to fill our dust limit without too many HTLCs");
+ for i in 0..max_htlcs_remaining + 1 {
+ assert_ne!(i, max_htlcs_remaining);
+ if nodes[0].node.list_channels()[0].next_outbound_htlc_limit_msat < dust_limit {
+ // We found our limit, and it was less than max_htlcs_remaining!
+ // At this point we can only send dust HTLCs as any non-dust HTLCs will overuse our
+ // remaining dust exposure.
+ break;
+ }
+ route_payment(&nodes[0], &[&nodes[1]], dust_limit * 2);
+ }
+
+ // At this point non-dust HTLCs are no longer accepted from node 0 -> 1, we also check that
+ // such HTLCs can't be routed over the same channel either.
+ create_announced_chan_between_nodes(&nodes, 2, 0);
+ let (route, payment_hash, _, payment_secret) =
+ get_route_and_payment_hash!(nodes[2], nodes[1], dust_limit * 2);
+ let onion = RecipientOnionFields::secret_only(payment_secret);
+ nodes[2].node.send_payment_with_route(&route, payment_hash, onion, PaymentId([0; 32])).unwrap();
+ check_added_monitors(&nodes[2], 1);
+ let send = SendEvent::from_node(&nodes[2]);
+
+ nodes[0].node.handle_update_add_htlc(&nodes[2].node.get_our_node_id(), &send.msgs[0]);
+ commitment_signed_dance!(nodes[0], nodes[2], send.commitment_msg, false, true);
+
+ expect_pending_htlcs_forwardable!(nodes[0]);
+ check_added_monitors(&nodes[0], 1);
+ let node_id_1 = nodes[1].node.get_our_node_id();
+ expect_htlc_handling_failed_destinations!(
+ nodes[0].node.get_and_clear_pending_events(),
+ &[HTLCDestination::NextHopChannel { node_id: Some(node_id_1), channel_id: chan_id_1 }]
+ );
+
+ let fail = get_htlc_update_msgs(&nodes[0], &nodes[2].node.get_our_node_id());
+ nodes[2].node.handle_update_fail_htlc(&nodes[0].node.get_our_node_id(), &fail.update_fail_htlcs[0]);
+ commitment_signed_dance!(nodes[2], nodes[0], fail.commitment_signed, false);
+ expect_payment_failed_conditions(&nodes[2], payment_hash, false, PaymentFailedConditions::new());
+}
+
+
#[test]
fn test_non_final_funding_tx() {
let chanmon_cfgs = create_chanmon_cfgs(2);
},
_ => panic!()
}
- let events = nodes[0].node.get_and_clear_pending_events();
- assert_eq!(events.len(), 1);
- match events[0] {
- Event::ChannelClosed { channel_id, .. } => {
- assert_eq!(channel_id, temp_channel_id);
- },
- _ => panic!("Unexpected event"),
- }
+ let err = "Error in transaction funding: Misuse error: Funding transaction absolute timelock is non-final".to_owned();
+ check_closed_events(&nodes[0], &[ExpectedCloseEvent::from_id_reason(temp_channel_id, false, ClosureReason::ProcessingError { err })]);
+ assert_eq!(get_err_msg(&nodes[0], &nodes[1].node.get_our_node_id()).data, "Failed to fund channel");
}
#[test]
projects / rust-lightning / blobdiff