/// lifetimes). Other times you can afford a reference, which is more efficient, in which case
/// SimpleRefPeerManager is the more appropriate type. Defining these type aliases prevents
/// issues such as overly long function definitions.
+///
+/// (C-not exported) as Arcs don't make sense in bindings
pub type SimpleArcPeerManager<SD, M, T, F, C, L> = PeerManager<SD, Arc<SimpleArcChannelManager<M, T, F, L>>, Arc<NetGraphMsgHandler<Arc<NetworkGraph>, Arc<C>, Arc<L>>>, Arc<L>, Arc<IgnoringMessageHandler>>;
/// SimpleRefPeerManager is a type alias for a PeerManager reference, and is the reference
/// usage of lightning-net-tokio (since tokio::spawn requires parameters with static lifetimes).
/// But if this is not necessary, using a reference is more efficient. Defining these type aliases
/// helps with issues such as long function definitions.
+///
+/// (C-not exported) as Arcs don't make sense in bindings
pub type SimpleRefPeerManager<'a, 'b, 'c, 'd, 'e, 'f, 'g, 'h, SD, M, T, F, C, L> = PeerManager<SD, SimpleRefChannelManager<'a, 'b, 'c, 'd, 'e, M, T, F, L>, &'e NetGraphMsgHandler<&'g NetworkGraph, &'h C, &'f L>, &'f L, IgnoringMessageHandler>;
/// A PeerManager manages a set of peers, described by their [`SocketDescriptor`] and marshalls
fn filter_addresses(ip_address: Option<NetAddress>) -> Option<NetAddress> {
match ip_address{
// For IPv4 range 10.0.0.0 - 10.255.255.255 (10/8)
- Some(NetAddress::IPv4{addr: [0xA, 0x00..=0xFF, _, _], port: _}) => None,
+ Some(NetAddress::IPv4{addr: [10, _, _, _], port: _}) => None,
// For IPv4 range 0.0.0.0 - 0.255.255.255 (0/8)
- Some(NetAddress::IPv4{addr: [0x0, 0x0..=0xFF, _, _], port: _}) => None,
+ Some(NetAddress::IPv4{addr: [0, _, _, _], port: _}) => None,
// For IPv4 range 100.64.0.0 - 100.127.255.255 (100.64/10)
- Some(NetAddress::IPv4{addr: [0x64, 0x40..=0x7F, _, _], port: _}) => None,
+ Some(NetAddress::IPv4{addr: [100, 64..=127, _, _], port: _}) => None,
// For IPv4 range 127.0.0.0 - 127.255.255.255 (127/8)
- Some(NetAddress::IPv4{addr: [0x7F, 0x0..=0xFF, _, _], port: _}) => None,
+ Some(NetAddress::IPv4{addr: [127, _, _, _], port: _}) => None,
// For IPv4 range 169.254.0.0 - 169.254.255.255 (169.254/16)
- Some(NetAddress::IPv4{addr: [0xA9, 0xFE, _, _], port: _}) => None,
+ Some(NetAddress::IPv4{addr: [169, 254, _, _], port: _}) => None,
// For IPv4 range 172.16.0.0 - 172.31.255.255 (172.16/12)
- Some(NetAddress::IPv4{addr: [0xAC, 0x10..=0x1F, _, _], port: _}) => None,
+ Some(NetAddress::IPv4{addr: [172, 16..=31, _, _], port: _}) => None,
// For IPv4 range 192.168.0.0 - 192.168.255.255 (192.168/16)
- Some(NetAddress::IPv4{addr: [0xC0, 0xA8, _, _], port: _}) => None,
+ Some(NetAddress::IPv4{addr: [192, 168, _, _], port: _}) => None,
// For IPv4 range 192.88.99.0 - 192.88.99.255 (192.88.99/24)
- Some(NetAddress::IPv4{addr: [0xC0, 0x58, 0x63, _], port: _}) => None,
+ Some(NetAddress::IPv4{addr: [192, 88, 99, _], port: _}) => None,
// For IPv6 range 2000:0000:0000:0000:0000:0000:0000:0000 - 3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff (2000::/3)
Some(NetAddress::IPv6{addr: [0x20..=0x3F, _, _, _, _, _, _, _, _, _, _, _, _, _, _, _], port: _}) => ip_address,
// For remaining addresses
/// Indicates a new outbound connection has been established to a node with the given node_id
/// and an optional remote network address.
+ ///
/// The remote network address adds the option to report a remote IP address back to a connecting
- /// peer using the init message.
- /// The user should pass the remote network address to whatever host they are connected to.
+ /// peer using the init message.
+ /// The user should pass the remote network address of the host they are connected to.
///
/// Note that if an Err is returned here you MUST NOT call socket_disconnected for the new
/// descriptor but must disconnect the connection immediately.
/// Indicates a new inbound connection has been established to a node with an optional remote
/// network address.
///
+ /// The remote network address adds the option to report a remote IP address back to a connecting
+ /// peer using the init message.
+ /// The user should pass the remote network address of the host they are connected to.
+ ///
/// May refuse the connection by returning an Err, but will never write bytes to the remote end
/// (outbound connector always speaks first). Note that if an Err is returned here you MUST NOT
/// call socket_disconnected for the new descriptor but must disconnect the connection
peer.their_node_id = Some(their_node_id);
insert_node_id!();
let features = InitFeatures::known();
- let resp = msgs::Init { features, remote_network_address: filter_addresses(peer.their_net_address.clone())};
+ let resp = msgs::Init { features, remote_network_address: filter_addresses(peer.their_net_address.clone())};
self.enqueue_message(peer, &resp);
peer.awaiting_pong_timer_tick_intervals = 0;
},
peer.their_node_id = Some(their_node_id);
insert_node_id!();
let features = InitFeatures::known();
- let resp = msgs::Init { features, remote_network_address: filter_addresses(peer.their_net_address.clone())};
+ let resp = msgs::Init { features, remote_network_address: filter_addresses(peer.their_net_address.clone())};
self.enqueue_message(peer, &resp);
peer.awaiting_pong_timer_tick_intervals = 0;
},
match type_id {
msgs::ChannelAnnouncement::TYPE |
msgs::ChannelUpdate::TYPE |
- msgs::NodeAnnouncement::TYPE => true,
+ msgs::NodeAnnouncement::TYPE |
+ msgs::QueryChannelRange::TYPE |
+ msgs::ReplyChannelRange::TYPE |
+ msgs::QueryShortChannelIds::TYPE |
+ msgs::ReplyShortChannelIdsEnd::TYPE => true,
_ => false
}
}
projects / rust-lightning / blobdiff